OBDII Logger With Display
OBD Logger device have:
-
3 CAN Channel pins: 6/14, 3/11, 3/8
-
4-Kline Channels pins: 1,7,12,15
-
microSD slot – used for standalone logging
-
micro USB port
-
TFT Display
-
WiFi
Supported CAN Speed: 100,125,200,250,500,800,1000
Supports 11bit and 29bit (extended) CAN
Supported K-line Speed: 4800,9600,10400,19200,38400,57600,115200,250000
​
OBD Logger have 3 working modes:
1. Standalone logger – writing all the data to sd card (no need for computer)
2. USB interface
3. WiFi Interface
Description
DISPLAY CLARIFICATION:
HW: Hardware Serial Number
PC: Connection Status [Disconnected, Connected USB, Connected WiFi, Connected to SERVER]
SD: SD Card Information [Total Space/Used Space or NO SD Card]
CAN: Can message count before filtering [messages per second/Sum: Total message count]
Fc: Filtered CAN. CAN message count after active filters
K: K-line information [Bytes per second/ Total bytes]
SEQ: Current sequence of file used for storing logs.
Used: Usage counter. How many times the device have been powered on
FiS: CAN Filter Single. Will show currently used ID for filtering
FiR: CAN Filter Range. Will show the range definition used for filtering can messages
CYC: Only for development
Uptime: Seconds passed after device boot
IP: IP address of device.
Green triangle: Device online and update is up to date.
Logging on CAN and K-line