top of page
LogoWide_s.png
RedLine01.jpg
Mercedes Benz Seed-Key Generator Tool (MB SKGT)

Mercedes Benz Seed-Key Generator Tool (MB SKGT)

Mercedes Benz Seed-key Generator Tool

OBD Logger device have:

​

  • 3 CAN Channel pins: 6/14, 3/11, 3/8

  • 4-Kline Channels pins: 1,7,12,15

  • microSD slot – used for standalone logging

  • micro USB port

  • TFT Display

  • WiFi

 

Supported CAN Speed: 100,125,200,250,500,800,1000

Supports 11bit and 29bit (extended) CAN

Supported K-line Speed: 4800, 9600, 10400, 19200, 38400,   57600,115200,250000

 

OBD Logger have 3 working modes:

 

1. Standalone logger - writing all the data to sd card

    (no need for computer)
2. USB interface
3. WiFi Interface

RedLine01.jpg
Description

The Mercedes Benz Seed-Key Generator Tool (MB SKGT) was designed to unlock MB controllers in different levels to get access to critical diagnostic procedures and functions. The unlocking challenges are kind of a question/answer game between ECU and diagnostic equipment. To give the correct secret answer to a question of the ECU you need the MB SKG Tool, which is able to calculate the correct answer. This software is specifically designed to work with Vediamo and Monaco.

There are several access/unlock levels for any controller in vehicles:

​

  • Unlock level 01 – makes security access to level one
    Functions/routines: request seed ECU unlock (27 01)/send key ECU unlock (27 02)
    This is used in most ecu’s till Emission EU6 for general ECU Unlock for doing Variant coding, Adaption…

  • Unlock level 03 – makes security access to level three
    Functions/routines: request seed ECU unlock lev3 (27 03)/send key ECU unlock lev3 (27 04)
    Functions/routines: request seed adjustment (27 03)/ send key adjustment (27 04)
    This is used in most ECU’s to unlock adaption values like IMA/ISA, DPF/SCR/AGR /MAF values…

  • Unlock level 05 – makes security access to level five
    Functions/routines: request seed reprogramming (27 05)/send key reprogramming (27 06)
    This is used to unlock the ECU for reflash/reprogramming it – attention – before ECU’s can give a seed for this functions

  • Unlock level 9A – makes security access to level 9
    Functions/routines: request Seed 9A (27 09)/send key 9A (27 0A)
    This is used as general Ecu unlock in newer ECU’s emission standard EU6 onwards. Mostly needs to be done first followed by another unlock for according special function.

  • Unlock level BC – makes security access level BC
    Functions/routines: request seed BC (27 0B)/send key BC (27 0C)
    Functions/routines: request seed Variant coding (27 0B)/send key Variant coding (27 0C)
    Is used in newer ECU’s emission EU6 onwards to unlock Variant coding
    These are the most common and used levels – different controllers may have different access levels, but working in same manner, also the output seed can have different length.

The software works with a USB dongle and the computer must have an Internet connection. This includes 10 Seed-Key calculations each day for 1 year. After the end of the year, a subscription will be paid for each subsequent year. We release new updates very often and all our software have automatic updates. Thus you can be sure you are always using the latest version of the app.

skgt1_thumb_Cut.png
skgt.png

SKGT Main package :

main1.png
skgtmain_5c73f7f081d48.png
main2_5c73f9e140095.png
main3.png
main4.png
main5.png
main6.png

Additional features not included in the base pack:

SKGT02 update – W205, W213:

In this function are added Seed -> Key generation for different modules.
For each module, the calculation of the algorithm is different. Can be:

27 01, 27 07, 27 09, 27 11, 27 0B – 8 bytes Seed used for Coding
27 05 – 8 bytes Seed used for Reprogramming

skgt2main.png
skgt2_1.png

SKGT03 update – W164, W166, W212, W246:


In this function are added Seed -> Key generation for different modules.

For each module, the calculation of the algorithm is different. Can be:

​

  • 27 01 – 4 bytes Seed used for Coding

  • 27 05, 27 11 – 8 bytes Seed used for Coding

  • 27 05 – 8 bytes Seed used for Reprogramming

skgt1_5c73f7efef773.png
skgt3_1.png

SKGT04 update – W222:

​

In this function are added Seed -> Key generation for different modules.
For each module, the calculation of the algorithm is different. Can be:

​

  • 27 01 – 4 bytes Seed used for Coding

  • 27 01, 27 05, 27 09, 27 07, 27 11, 27 61, 27 0B – 8 bytes Seed used for Coding

  • 27 05, 27 11 – 8 bytes Seed used for Reprogramming

  • Algorithm 1 – 8 bytes seed -> 4 bytes key, 4 bytes seed -> 4 bytes key

  • Algorithm 2 – 8 bytes seed -> 4 bytes key, 4 bytes seed -> 4 bytes key

skgt4main.png
skgt4main2.png
4_1.png
4_2.png

SKGT05 update – W415, W447, W453, W906:


In this function are added Seed -> Key generation for different modules.
For each module, the calculation of the algorithm is different. Can be:

​

  • 27 01, 27 03 – 2 bytes Seed used for Coding

  • 27 01, 27 81 – 6 bytes seed used for Coding

  • 27 05 – 8 bytes Seed used for Reprogramming

skgt5main.png
skgt5main2.png
skgt5_1.png
skgt5_2.png

SKGT06 update – Miscellaneous modules:


In this function are added Seed -> Key generation for different modules.

  • 27 05, 27 11 – used for Reprogramming

  • 27 01,27 09, 27 11, 27 0B – used for Coding

skgt6_1.png
skgt6main.png

SKGT07 update – Dashboards and AMG activation – W204, W207, W212,
W218, W197, W166, W176, W246, X156, W205, W222, W213, W447:

​

In this function are added Seed -> Key generation for different modules.
For each module, the calculation of the algorithm is different. Can be:

 

  • 27 71 – 4 bytes Seed used for Coding and AMG activation

  • 27 09, 27 05, 27 0D – 8 bytes seed used for Coding and AMG activation

  • 27 05 – 8 bytes Seed used for Reprogramming

  • 27 61 – 8 bytes for EEPROM access

skgt7_1.png
skgt7main.png

SKGT08 update – MRD1, CRR1, CRR2, MRG1, EMS71,
HU6, MED41, TCM7DCT, TCM7FDCT, TCM9FDCT:

​

In this function are added Seed -> Key generation for different modules.
For each module, the calculation of the algorithm is different. Can be:

​

  • 27 01 – 8 bytes Seed used for Coding

  • 27 05, 27 09, 27 0B, 27 11 – 8 bytes seed used for Coding/Reprogramming

skgt8_1.png
skgt8main.png

SKGT09 update - W177, W157, W247, W167 - Reprogramming, Adjustments, EEprom access, Read/Write/Delete Extended Controller data and variantcoding:

In this function are added Seed -> Key generation for different modules. For each module, the calculation of the algorithm is different. Can be:

 

27 01, 27 07, 27 0B – 8 bytes Seed used for Coding;

27 11 – 8 bytes seed used for Reprogramming;

27 09 – 8 bytes seed used for Adjustments;

27 31, 27 33, 27 35, 27 37 – 8 bytes seed used for Reprogramming;

27 31 – 8 bytes seed used for EEprom data access.

skgt09A.png
U9_List_a.png
U9_List_b.png
skgt09C_r.png

SKGT10 update - TRUCKS 

  • MB Actros MP4 year 2011-2018

  • Antos 2012-2019

  • Arocs 2012-2019

  • Atego 4 2014-2019

  • Atron 2013-2019

  • Axor 3 2011- 2013

  • Unimog 2014-2019

  • Econic2 2014-2014

  • Kaessbohrer Snow Groomers 2014-2019

  • Claas Arion & Axion Tractors & Harversters

  • Industrial Engines for OM470/471/473

Variant Coding, Changing EOL, Change Vmax parameters...

In this function are added Seed -> Key generation for different modules. For each module, the calculation of the algorithm is different. Can be:

27 01, 27 03, 27 07, 27 09, 27 0B, 27 0D, 27 0F, 27 11, 27 13 – 2 bytes Seed

skgt10main.png
skgt10.png
skgt10cpc301.png

Here you can see videos, how our software works :

Vediamo and SKGT Change Variant Coding - CRD2 Ecu:

W204 AMG activation with Vediamo and SKG:

Vediamo and SKGT Change Variant Coding:

RedLine01.jpg
Brands_01_TR.png
bottom of page