Specifications & details
We are pleased to present you our latest T-Diag Software.
Especially designed to diagnose and repair TESLA vehicles.
T-Diag Main Package comes with the OBDII interface, Dongle, USB Lan Hub and Basic software.
Currently available for Tesla Model S, Model X and Model 3
We offer the following packages:
Main Package
​
- Scan the available modules in the vehicle, Read and clear all DTCs
- Air suspension - Set Ride Heigh, Service mode, Force Gallery Pressure, Get Pressure, Live Ride Heigh, TAS Clear Crash Data
- Brakes/ESP/TPMS - Read TPMS ID, Brake Bleeding, Steering Wheel Angle calibration, Activate EPB Service Mode, Get Versions
- Battery/BMS - BMS Read Serial number, BMS Contactor Reset, Reset Contactor Stress Index, Reset Contactor WOT Counter
- Live Data - Read Alerts.
- Advanced functions, Read Car Vitals, Keyless Driving ON/OFF, Valet Enable/Disable, Showroom Enable/Disable, Reset IC, Master Reset, Reset CID, Reset GW, GW Telnet Allow, Bus Wake, Rails ON, Enter/Exit Diag, Enter/Exit Factory Mode, Enter/Exit Development Mode
- Alerts - Read All and Current alerts.
Advanced Package
- Read/Write Configuration
- Odometer recalibration
- Pin to Drive
- Emergency moving
- Disable Pin to Drive
- Key programming for Model S
( Add key or All keys lost)
Full Package
​
Main package & Advanced Package
Model 3 Hardware supported functions :
- Factory Mode enables you to access all service functions.
- Clear pin to drive
- Redeploy
- Change Gateway Config
- Change & Update Maps/Regions
- Convert Us to Eu
​
- You can see more details here: https://youtu.be/iYy6mYgAeaI
Please keep in mind that all functions are supported on non rooted MCU1(Tegra) and MCU2(Intel**) with versions up to 2021.4.3
* to use white fakra, first you must put car in factory mode via black connector behind IC
​
Windows 10 supported only
​
​
These are just some of the features of our software:
1. Our tool can install firmware on car
2. Can redeploy car (Adjustment of non-original vehicle modules reprogramming of used parts modules)
3. Have functions to download current firmware version from car to assist when changing emmc chip in cid if emmc totally damaged and can not be read. By that way with our tool you can extract car configuration from car without cid and generate files needed for new CID emmc image. This way you do not have to worry about Spansion chip version
4. Our tool can enable GW Serial console to CID
5. Have functions for bench setup of IC
6. Can backup and restore IC
7. Can retrofit modules by GW/CID configuration
8. Can set configuration if you do US/EU Conversion and swap radio and charger module
9. Can recode new battery if different from original
Scan the available modules in the vehicle, Read and clear all DTCs
Basic software functionality:
Air suspension
Set Ride Heigh, Service mode, Force Gallery Pressure, Get Pressure, Live Ride Heigh, TAS Clear Crash Data
Bench
Power On/Off IC on Bench
Airbag - Read/Write Eeprom
Clear Crash data, Read Resistance
Brakes/ESP/TPMS - Read TPMS ID
Brake Bleeding, Steering Wheel Angle calibration, Activate EPB Service Mode, Get Versions
Cooling
THC AirPurge Start/Stop, THC Refill\Drain Start/Stop
Battery/BMS
BMS Read Serial number, BMS Contactor Reset, Reset Contactor Stress Index, Reset Contactor WOT Counter
Live Data
Read Alerts
Door Handles ICE Breaker, Steering Wheel Column calibration, Rear Wing calibration
Body
Alerts
Read All and Current alerts
Advanced Functions
Read Car Vitals, Keyless Driving ON/OFF, Valet Enable/Disable, Showroom Enable/Disable, Reset IC, Master Reset, Reset CID, Reset GW, GW Telnet Allow, Bus Wake, Rails ON, Enter/Exit Diag, Enter/Exit Factory Mode, Enter/Exit Development Mode
Advanced Package Functionality
This package include
Read/Write Configuration, Odometer recalibration, Pin to Drive, Emergency moving, Disable Pin to Drive.
T-Diag Software Performance & Special Features
Odometer recalibration with T-Diag
